Flanging is the process of putting the return lip on to the end of a silencer / muffler case, to enable the end plate to be spun onto the case. FLANGING MACHINE The ETL Flanger is of a vertical configuration especially suited to cellular manufacture where floor space is at a premium. The machine is fitted with quick change tooling, and a rapid set mode, ensuring minimum downtime between product runs. When used in conjunction with the ETL Casemaker, a single operator can produce a flanged[...]

Baffle loading is the process of inserting the internal assembly into a silencer/muffler case. BAFFLE LOADING MACHINE The ETL Baffle Loading Machine is of a vertical configuration, especially suited to cellular manufacture, where floor space is at a premium. The machine is designed to assemble both single and double inserts, dependant on box configurations. Featuring a rapid setting mode, and quick-change tooling ensures minimum down time between product runs, and simplicity of setting[...]

The Lockseam Casemaking machine has been specifically designed for use in a cellular manufacturing environment. The machine has a small footprint The machine utilizes a simple and easy to change, trolley mounted mandrel. The mandrel is loaded via an interlocked gate, and once the mandrel is installed, and the gate closed, all other setting is carried out at the front panel of the machine. The machine produces high quality, consistent lockseams and all boxes produced are parallel. The unique[...]

These machines are able to ridgelock a complete multipass assembly in one cycle. This is achieved by loading all the components onto the machine (upto a maximum off four- (4) baffle plates, and four (4) tubes on a (4x4) machine. The cycle is then activated, and the machine ridgelocks all the baffle plate / tube joints in one cycle. Standard 3x3 Multi Ridgelocking machine The standard machine is able to Ridgelock upto a maximum of three (3) tubes to a maximum of three (3) baffle plates. Standard[...]

On line pierce and raise is the punching and raising of a lip on an end plate or baffle plate for box production. This process is also known as extrusion WHY PERFORM AS A SEPARATE OPERATION ? Tooling for the pierce and raising of holes as part of the end plate production is expensive and dedicated. These machines use low cost tooling, which is flexible in use, and is based on the quick-change principle. This tooling is easily fitted by operators, thus eliminating the need for setters. As[...]